Clamps, also called cramps, are gripping tools like vices, except they are more portable and come in a wide range of shapes and sizes depending on the particular purpose for which they have been designed. Clamps are used to hold materials firmly in position while they are being cut or to hold joints together until the glue dries.
The G-clamp is instantly recognizable because it resembles the letter ‘G'. It is an extremely versatile clamp and can be used to hold materials together in fairly awkward positions. When using the G-clamp always position offcuts of wood between the jaws of the clamp and the surface of the material being clamped to prevent damage.
Buy online >>
This elongated G-clamp is designed to hold larger objects in place. One jaw of the clamp is fixed in position by slotting the securing pin through the hole in the bar. Then the other jaw is adjusted by rotating the screw mechanism. Some sash clamps have a serrated central bar that grip the moveable jaw instead of holes and a securing pin.
Similar to the sash clamp, the screw clamp is another type of elongated G-clamp and is also used to hold larger objects. It consists of a serrated central bar, a fixed jaw and an adjustable jaw. The adjustable jaw slides along a serrated central bar and is set in position by tightening the threaded bar using an easy-grip handle.
A clamp designed for use on materials that come together at a right angle. As the two threaded bars are tightened, pressure is applied to each side of the right angle.